Manual Connection Setup - Avtech AVH306 Schnellstart

2.2 Manual Connection Setup

To manually assign a channel to connect to the IP camera, select a corresponding "PROTOCOL" from the drop
down list first, click "URI" to enter the address of the camera, and enter its port number. There are four protocol
types available in the drop down list as follows: "AVTECH", "ONVIF", "RTSP OVER HTTP", and "RTSP OVER
UDP". If you are using AVTECH IP cameras, please select "AVTECH"; otherwise, choose the protocols your
cameras support.
CONNECTION
CAMERA
DETECTION
ALERT
NETWORK
DISPLAY
RECORD
NOTIFY
EXIT
ADVANCED CONFIG
CHANNEL PROTOCOL
CH1 AVTECH
CH2 ONVIF
CH3 RTSP OVER HTTP
CH4 RTSP OVER UDP
CH5 AVTECH
CH6 AVTECH
URI
://ip_office.ddns.eagleeyes.tw
://10.1.1.14
://10.1.1.30
://10.1.1.12
://10.1.1.16
://10.1.1.13
6
CONNECTION
PORT PA TH CONFIG
:80 / SETUP
:88 / SETUP
:88 / SETUP
:88 / SETUP
:88 / SETUP
:88 / SETUP