General Data; Operation - JCM Technologies MICRO-DCS Bedienungsanleitung

This microreceiver is designed to memorise "Dynamic Code" transmitter
codes.

GENERAL DATA:

Frequency
Code memorisation system
Memory capacity
Memory type
No. channels
Antenna
Certificate
*UK only
TECHNICAL DATA:
Power
Power range in 12V d.c.
Relay contacts
Sensitivity
Power consumption at rest
Working temperature
Watertight
Dimensions
Upon receiving a code, the receiver first checks whether it is stored in
memory and if so, activates the channel for the microreceiver model used.
If the code received is not stored in memory, the receiver takes no further
action.
There are two different microreceiver models: single channel and double
channel.
• The single-channel microreceiver can be activated by a single channel
transmitter or by the second, third or fourth channel of a transmitter, if this
channel has been stored previously in the microreceiver.
• Double channel microreceiver:
- The relays are activated as follows: Relay 1 by the first channel and Relay
MICRORECEIVER 12/24V
MICRO-DCS
433,92 / 418* MHz
Self-learning or via programmer
31/126/500 codes
Removable EEPROM minicard
1 or 2 channels (depending on version)
Built-in adjustable
Meets European std EN 300 220-1
12/24 VAC/DC
from 11,8V to 13V
1A/125 VAC
> 100 dBm
15 mA
-20° to 85° C
IP44
127 x 70 x 52 mm

OPERATION

15