Mode-Key; Double Shaft Encoder - Garrecht Avionik VT-01 Bedienungsanleitung

Garrecht Avionik GmbH

1.3. Mode-key

Key 3 selects the following modes:
• SBY Standby - System is switched on, no replies or squitters will be sent.
• ON Selected reply code will be replied for Mode-A/C interrogations, altitude
information is set to zero, squittering is enabled, Mode-S interrogations
will be replied
• ALT Selected reply code will be replied for Mode-A/C interrogations, altitude
information is set to indicated value, squittering is enabled, Mode-S
interrogations will be replied

1.4. Double shaft encoder

Main input device for setting values is the double shaft encoder. Rotating the outer
knob selects the position to be modified. Rotating the inner knob changes the
selected value.
The edit mode will be started rotating the inner or outer knob of the double shaft
encoder.
Pushing the inner knob confirms the selected value and cancels the edit mode
(cursor stops blinking)
Revision: 1.2
VT-01 Transponder
6
User manual
Dokument 01.0200.10E
12.01.2006