Garrecht Avionik GmbH
5. Status and info menu
Press the on/off key and hold it. Then Press the ident key within 3 sec..
•
The LCD screen shows Status.
•
Use the outer knob of the rotary encoder to select one of the following menus (Status or
•
Info).
Press the inner knob of the rotar encoder to start displaying the following information.
•
Status menu
contr.-panel
OK
xpdr-unit
OK
alticoder
OK
alt-sensor
OK
comm
OK
Revision: 1.2
VT-01 Transponder
In case of a failure indication or warning,
an extended failure report can be
requested to determine the failure reason.
Follow these steps to enter the failure
report page
SteeringUnit
Softw.v 1.01
Mode-S Addr.
12AB34 hex
Central Unit
Softw.v.1.01
Central Unit
FPGA
Key:C1943AF1
14
Dokument 01.0200.10E
Info menu
Garrecht
VT-01
v.1.01
User manual
12.01.2006