Garrecht Avionik GmbH
1.1. Input devices
Picture of front panel with Input devices
1
2
3
4
The system will be operated using the following devices:
Nr.
Description
1
On/Off key
2
Ident – key
3
Mode – key
4
Double shaft Encoder with Push
on capability
1.1. On/Off key
To enable the system, press key 1 shortly. After the start, the unit performs the built
in test and shows the operating mode. For switching off, press key 1 for at least 3
seconds Release the key, when the LCD becomes blank
1.2. Ident key
Pressing key 2 invokes the ident mode for 18 seconds. Use this function only when
the ATC requires to sqawk ident.
Revision: 1.2
VT-01 Transponder
Function
Switches the system On or Off
Invokes the Ident Mode for 18 sec.
Selects the operating mode
Enters or modifies values
5
User manual
Dokument 01.0200.10E
12.01.2006