Avaya 3500 Series Handbuch Seite 31

Procedure
1. Ensure power is disconnected from the switch.
2. Attach a bracket to each side of the switch with the included screws.
3. Slide the switch into the rack. Insert and tighten the rack mount screws.
4. Verify that the switch is securely fastened to the rack.
Regulatory Information 5.0
Note:
The ERS 3500 Series mounting hardware is specific for each switch model. Do
not mix screws or brackets between different ERS 3500 Series switches.
Installation preparation
February 2012 31