Master/Slave Connection - Chauvet Professional Ovation F-415VW Schnellanleitung

AC Plug
Connection
AC Live
AC Neutral
AC Ground
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.
• Never connect this product to AC and DC power sources at the same time.
Replacing the Fuse
1. Disconnect this product from power.
2. Using a Phillips #2 head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove blown fuse and replace with a good fuse of the same type and rating.
4. Screw the fuse holder cap back in place and reconnect power.
Power Diagram
100–240 VAC, 50/60 Hz
Input Only
DMX Linking
The Ovation F-415VW will work with a DMX controller using a 5-pin DMX serial connection. A DMX Primer is available
from www.chauvetprofessional.com.
DMX Connection
The Ovation F-415VW uses a 5-pin DMX data connection for its 7 DMX personalities: 4 Ch, 6 Ch, 7 Ch, 9 Ch,
13 Ch, 16 Ch, and 18 Ch. See the User Manual for information about connecting and configuring the product for DMX
operation.

Master/Slave Connection

The Ovation F-415VW uses the DMX data connection for its master/slave mode. See the User Manual for information
about how to connect and configure the product for master/slave operation.
RDM (Remote Device Management)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally
along existing DMX cabling. Check the DMX controller's User Manual or with the manufacturer as not all DMX controllers
have this capability. The Ovation F-415VW supports RDM protocol that allows feedback to make changes to menu map
options. Download the User Manual from
Mounting
Before mounting this product, read the
mounting clamps are capable of supporting the weight of the product. For our Chauvet line of mounting clamps, go to
http://trusst.com/productcategory/truss-clamps/
Ovation F-415VW QRG Rev. 4
QUICK REFERENCE GUIDE
Wire (U.S.)
Black
White
Green/Yellow
Rear Panel View
www.chauvetprofessional.com
Safety Notes. Use at least one mounting point per product. Make sure the
Wire (Europe)
Brown
Blue
Green/Yellow
28 VDC Input Only
for more details.
EN
Screw Color
Yellow/Brass
Silver
Green
2