Setting The Time - Velleman BTSP7 Bedienungsanleitung

6. Operation
6.1 Charging
Connect your speaker to a powered USB port using the included USB cable.
The red LED burns while charging. The speaker will be fully charged after
± 5 hours.
To avoid the internal battery from leaking, please charge the
speaker once every two months, even if it will not be used.
Disconnect from the power supply after charging.

6.2 Setting the Time

1. Make sure the speaker is fully charged. Slide the on-off switch at the
back of the speaker to the on position. Hold the on-off button pressed
to switch on the speaker.
2. Hold the mode button pressed to enter the clock mode. Set the hour
with the previous/next buttons. Press the mode button to confirm and
to set the minutes and date accordingly.
3. In normal mode, shortly press button previous/next track to select the
12/24h or AM/FM display mode.
6.3 Selecting the Date
In normal mode, shortly press the mode button once to display the date.
The display will automatically return to the normal mode.
6.4 Setting the Alarm
1. In normal mode, shortly press the mode button twice to display the
alarm mode. Hold the mode button pressed to enter the alarm mode.
2. Set the hour with the previous/next buttons. Press the mode button to
confirm and to set the minutes and on/off mode accordingly.
The speaker features one standard alarm tune but supports
user-custom tunes saved on a USB stick or microSD card.
To use your tune, do as follows:
1.
2.
V. 02 – 26/06/2017
Save your MP3 tune in a file named Alarm and save on
your USB stick or microSD card. Note that only the first
song in the file will be recognized.
Keep your USB stick or microSD card connected to the
speaker.
BTSP7
4 ©Velleman nv