Herunterladen Inhalt Inhalt Diese Seite drucken

Marpol 210 Handbuch Seite 48

Kombimaschine: schwingschleifer und schleifscheibe
Inhaltsverzeichnis

Werbung

• Agire sul pomello (A) per
allentare la tensione del
nastro e contemporanea-
mente sfilare il nastro stes-
so dai rulli.
• Inserire il nuovo nastro con le
frecce rivolte verso il rullo con-
dotto (senso di rotazione del mo-
tore).
Il montaggio del nastro in senso opposto a
quello indicato dalle frecce stampigliate nel-
la sua parte interna, genera inevitabilmente la rot-
tura del nastro stesso.
• Effettuare la centratura, agendo (nei due sensi) sul
pomello (B - F. 14).
• Imprimere manualmente al nastro, un paio di rota-
zioni, nel senso indicato dalle frecce.
NOTA - Durante questa manovra, se il nastro è mon-
tato correttamente, tende a spostarsi verso
l'esterno.
• Eseguire la regolazione di centratura definitiva, del
nastro.
• Rimontare i carter precedentemente rimossi.
• Avviare il motore per verificare la corretta rotazione
del nastro abrasivo.
Durante l'utilizzo della macchina, l'inevitabile
riscaldamento del nastro ne può procurare l'al-
lungamento. È quindi necessario controllarlo di fre-
quente e se necessario, ripristinare le regolazioni.
MARPOL - mod. 210
A
F. 14
F. 15
arrows on the inner cover.
• Carry out the centering operations by turning (to both
sides) the knob (B - F. 14).
• Rotate the belt manually a couple of time in the direc-
tion indicated by the arrows.
NOTE - If the tape is properly fitted, it will tend to move
• Carry out the belt final centering adjustment.
• Fit back the cover guards previously removed.
• Start the motor and check for the abrasive belt
rotation.
same. For this reason we recommend to check the belt
tension regularly and to adjust it when necessary.
48/60
B
• Act on the knob (A) in order
to loosen the belt tension
while extracting the belt
from the rollers.
• Fit a new tape with the arrows
towards the driven roll (according
to the motor rotation direction).
The tape will inevitably break if its direction
is opposite to the direction indicated by the
from inside out during this monoeuvre.
The natural overheating of the belt during the ma-
chine operation may lead to the stretching of the
5

Werbung

Inhaltsverzeichnis
loading

Verwandte Produkte für Marpol 210

Inhaltsverzeichnis