Seite 1
Speedbar genannt, kann ganz leicht install into your harness within 4 in 4 Schritten angebracht werden. steps. This manual explains Diese Anleitung erklärt das korrekte how to mount the speedbar to Fresh anbringen der Speedbar an Fresh Breeze harnesses. Breeze Gurtzeugen.
Öse führen. Step 1 A rough preset for the length of the speedbar should be done before mounting. Start to thread the rope of the speedbar from the outside to the inside through the eyelet.
Die Schnur der Speedbar durch die im Gurtzeug integrierte Umlenkrolle von unten nach oben führen. Step 2 Now lead the rope of the speedbar bottom-up through the pulley which is integrated to the harness. [Abb. 2] Einführen in die Umlenkrolle...
Seite 4
Step 3 Knot the brummehooks to the rope with a bowline knot. Afterwards, connect the brum- melhooks of the speedbar with the integrated brummelhooks of the risers. You should preset a rough length for the pilot. [Abb. 3] Einhängen der Brummelhaken...
Seite 5
[HOW TO] Speedbar anbringen Feinjustierung Schritt 4 Die Feinjustierung der Länge kann dann im Flug mittels der orangenen Klemme vorgenommen werden. Step 4 The fine adjustment can be made during flight with help of the orange clamp. Item No# 80028.1...