Safety Requirements; Symbols Used; Symbols Used In The Manual; Symbols Present On Product Labelling - Faro SIDEREA Gebrauchsanleitung Und Installation

1. SAFETY REQUiREMEnTS

Dear Client,
FARO hopes you enjoy your work with the new high quality light. For safe work and to take
full advantage of the performance of the product, carefully read this manual before using the
device. In particular, follow all the warnings and the notes given.
1.1

SYMBOLS USED

1.1.1 Symbols used in the manual

WARNING
Paragraphs highlighted with this symbol contain instructions which must be carried followed
out with care to avoid damage the device, the operator or the patient.
WARNING
These instructions warn of the need to take particular care to avoid situations which might
damage the device.
PROHIBITION
This icon places in evidence what must not be done, in order to avoid damage to the device.
NOTE
With this icon, information is given which allows for using the device in a more effective
manner.

1.1.2 Symbols present on product labelling

The data label is affixed to the upper part and contains the following data:
Serial Number (SN): year (YY) / device family (AL) for light environment, plus progressive
number (NNNNNN) e.g.: SN17AL000001
There are present the following harmonized symbols:
Manufacturer's symbol
! The instructions for use include safety warnings
RAEE equipment in compliance with the Directive 1012/19/EC.
Dispose of the product in compliance with this directive.
Serial Number
SN
32°C
Use the device at a temperature between 10°C and 32°C
10°C
106 kPa
Use the device at pressure between 80 kPa and 106 kPa
80 kPa
75% RH
Use the device at relative humidity between 30% RH and 75%RH
30% RH
1.1.3 Symbols present on the product
Simbolo per l'accensione/spegnimento della luce sul radiocomando
17 17