Setting Up The Camera - Bosch FlexiDome VF VDM- 345V03-10 Installationshandbuch

FlexiDome | Installation Manual
VF

Setting up the camera

You can connect a monitor to the miniature 2.5mm jack socket on the
printed circuit board to help set up the camera. This socket provides a
composite video signal (with sync). An optional cable (code number
S1460) is available for making this connection.
Monitor jack
Bosch Security Systems | 2005-11 | V1.0
Focus
Thumbwheels
EN | 13
Focal length
Navigation
switches