Datamax I-Class Kurzanleitung Seite 38

Fan-Fold Media
1. Route the media through the rear or bottom fan-fold media slot, continue to guide
the media over media hub.
2. Route the media under the media idler, up through the printhead area, (ensure
that the media passes through the media sensor), and over the platen roller.
Continue to pull until approximately 4-inches of media are visible from the front
of the printer.
3. Slide the media guide against the edge of the media.
4. Lower and latch the printhead.
5. Press the feed button several times to ensure proper tracking.
6. Close the cover.
26