ASROCK X79 Extreme4 Handbuch Seite 44

2.16.2 Installing Windows
RAID Functions
If you want to install Windows
/ SATA2 / SATA3 HDDs without RAID functions, please follow below steps.
Using SATA / SATA2 / STA3 HDDs without NCQ function
STEP 1: Set up UEFI.
A. Enter UEFI SETUP UTILITY
B. Set the option "SATA Mode" to [IDE].
STEP 2: Install Windows
system.
Using SATA / SATA2 / SATA3 HDDs with NCQ function
STEP 1: Set up UEFI.
A. Enter UEFI SETUP UTILITY
B. Set the option "SATA Mode" to [AHCI].
STEP 2: Install Windows
system.
2.17 Untied Overclocking Technology
This motherboard supports Untied Overclocking Technology, which means during
overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses. Before you
enable Untied Overclocking function, please enter "Overclock Mode" option of UEFI
setup to set the selection from [Auto] to [Manual]. Therefore, CPU FSB is untied
during overclocking, but PCI / PCIE buses are in the fixed mode so that FSB can
operate under a more stable overclocking environment.
Please refer to the warning on page 9 for the possible overclocking risk
before you apply Untied Overclocking Technology.
44
®
7 / 7 64-bit / Vista
®
7 / 7 64-bit / Vista
Advanced screen
®
7 / 7 64-bit / Vista
Advanced screen
®
7 / 7 64-bit / Vista
ASRock X79 Extreme4 Motherboard
TM TM
/ Vista 64-bit Without
TM TM
/ Vista 64-bit OS on your SATA
SATA Configuration.
TM TM
/ Vista 64-bit OS on your
SATA Configuration.
TM TM
/ Vista 64-bit OS on your