Inhaltsverzeichnis
Werbung
Allixx SCC 5460 RDS / Allixx SCD 5490 RDS
EXPERT LEVEL _____________________________________________________________________________
9: Beep – Signal tone on/off
– Display: »Beep On« – Signal tone for confirming
functions.
– Display: »Beep Off« – Functions are confirmed
by a brief muting of the loudspeakers.
10: AM Band – On/off
– Display: »On« – The AM range can be selected.
– Display: »Off« – The AM range is switched off.
11: SW Band – On/off
– Display: »On« – The KW range can be selected.
– Display: »Off« – The KW range is switched off.
12: Search level– Search sensitivity
– Display: »Local« – Reduced search sensitivity.
– Display: »DX« – Immediate increased sensitivity.
13: RDS Regional – Automatic changing of the
regional station
- Display: »On« or »Off«
– Display: »RDS Regional On« – Frequency
change only possible between regional stations.
– Display: »RDS Regional Off« – Station change
via automatic search.
CODING ____________________________________________________________
The code number for the device can be found on
the identity card. Coding is not activated by
default. When the coding is activated, the dev-
ice is electronically secure. Following removal, it
can only be switched on again if the code num-
ber is re-entered.
Activating coding
1
Select the EXPERT level by pressing
until EXPERT appears in the display.
Select »Protection« using the
2
knob.
3
Press
SOUND
briefly.
– Display: »----« flashes.
Enter the code number by pressing memory
4
buttons »1« – »4« repeatedly.
16
ENGLISH
GRUNDIG Service
14: Date Format
– Display: »DDMMYY« or »YYMMDD«
15: Clock »On«, »Off« or »RDS« (RDS synchro-
nisation)
Note: With RDS synchronisation, settings 16 -
18 disappear. When Time is Off, settings
15-19 disappear.
16: Time setting
17: Year setting
18: Date setting
19: Standby Clock – On or off. The time is dis-
played when the ignition is switched on.
20: Ignition – Switching on and off
– Display: »Ignition On« – The car radio can be
switched on and off with the vehicle ignition.
– Display: »Ignition Off« – The device can only
be switched on and off by pressing »IO«.
Example: Code number 1703
»1« Press briefly once
»2« Press briefly seven times »1700«
»3« Press briefly ten times
»4« Press briefly three times
Briefly press
5
SOUND
– Display: »SAFE« – Coding is activated.
SOUND
6
To quit the EXPERT level hold down
until you hear the signal.
volume
Deactivating coding
1
If, for example, you want to remove the dev-
ice, select the EXPERT level and select
»SAFE« on the display.
To deactivate the coding, repeat steps
2
21: MCD/Aux/MP3 Level setting
CD changer volume adaptation
(if connected).
22: Tape Level/CD Level setting
Tape or CD unit volume adaptation.
25: Display – Setting the positive or negative
display.
– Display: »Blue« or »White«.
26: Displ. contrast – Setting the contrast for the
display field.
– Display: »Disp Contrast«, bordered display.
27: Day/Night – Adaptation to the instrument
illumination.
– Display: »On« or »Off«.
Renewed operation when
coding is active
»1000«
Switch on the car radio.
1
– Display: temporarily »SAFE«, then
»1700«
»1----«.
»1703«
– The »1« indicates the number of attempts
to confirm.
at entering the code.
2
Enter the code number using the station but-
SOUND
tons »1«, »2«, »3«, »4«.
Press
3
SOUND
– The radio is in operating mode.
Note:
Only enter the correct code number! Take
note of the increasing waiting time between
attempts.
to 6.
3
After the sixth failed attempt we recommend
that you have a specialist dealer enter the
code.
The waiting time not elapsed is displayed.
Allgemeiner Teil / General Section
15
ENGLISH
ENGLISH
to confirm your entry.
1 - 7
Werbung
Inhaltsverzeichnis
