Specifications; Standards And Approvals - Epson TM-L500A Benutzerhandbuch

English

Specifications

Printing method
Paper Boarding pass Width: 82.5 ± 0.5 or 79.5 ± 0.5 mm
dimensions
Baggage tag
Interface
Power supply
Temperature
Humidity
Overall dimensions
(H × W × D)
Weight (mass)
Mbps: megabits per second

Standards and Approvals

The following standards are applied only to the
printers that are so labeled. (EMC is tested using the
Epson power supplies.)
Europe: CE marking
North America: FCC/ICES-003 Class A
Oceania: AS/NZS CISPR22 Class A
WARNING
This is a Class A product. In a domestic environment
this product may cause radio interference in which
case the user may be required to take adequate
measures.
The connection of a non-shielded printer interface
cable to this printer will invalidate the EMC
standards of this device.
You are cautioned that changes or modifications not
expressly approved by Seiko Epson Corporation
could void your authority to operate the equipment.
CE Marking
The printer conforms to the following Directives and
Norms:
Directive 2004/108/EC
EN 55022 Class A
EN 55024
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
Thermal line
Length: 203.2 ± 0.38 and 187.325 mm
Thickness: 76 ~ 200 µm
Width: 54 ± 0.5 mm
Length: 440 ~ 600 mm
Thickness: 220 µm or less
Serial (RS-232)/Ethernet (10BASE-T/100BASE-TX)/
USB [Compliance: USB 2.0, Communication speed: Full-speed (12 Mbps)]
PS-180 (model: M159B)
Operating: 5 to 45°C {41 to 113°F}
Storage: –20 to 50°C {-4 to 122°F}, except for paper
Operating: 10 to 80% RH
Storage: 10 to 90% RH, except for paper
Model with LCD: 148 × 156 × 236 mm {5.83 × 6.14 × 9.29"}
Model without LCD: 122 × 156 × 230 mm {4.80 × 6.14 × 9.06"}
Approx. 2.8 kg {6.2 lb}
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-11
FCC Compliance Statement For
American Users
This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is
likely to cause harmful interference, in which case the
user will be required to correct the interference at his
own expense.
For Canadian Users
This Class A digital apparatus complies with
Canadian ICES-003.
À l'intention des utilisateurs
canadiens
Cet appareil numérique de classe A est conforme à la
norme canadienne NMB-003.