Specifications - Epson TM-H6000IV Benutzerhandbuch

Specifications

Printing method
*1
MICR recognition method Magnetic bias
Paper Receipt
dimensions
Slip
Paper thickness
Inked ribbon
Interface (compatible)
2
Supply voltage*
Temperature
Humidity
Overall dimensions
Weight (mass)
Mbps: megabits per second
*1: Factory installed options
*2: Be sure to use a safety-standards-applied power source that meets the following specifications.
Rated output: 24 V/2.0 A or more, Maximum output: 240 VA or less
Receipt: Thermal line
*1
Slip/Endorsement : 9-pin serial impact dot matrix
79.5 ± 0.5 × 83 mm {3.1 ± 0.02 × 3.3"}
68 ~ 230 × 68 ~ 297 mm {2.7 ~ 9.1 × 2.7 ~ 11.7"} (W × L)
Slip (single ply): 0.09 ~ 0.22 mm {0.0035 ~ 0.0087"}
Slip: ERC-32, Endorsement
Serial (RS-232)/Parallel (IEEE 1284)/Ethernet (10BASE-T/100BASE-TX)/
Wireless LAN (IEEE 802.11b)/USB [Compliance: USB 2.0,
Communication speed: Full-speed (12 Mbps)]/USB Plus Power
[Communication speed: Full-speed (12 Mbps)]
DC + 24 V ± 7%
Operating: 5 to 45°C {41 to 113°F}
Storage: –10 to 50°C {14 to 122°F}, except for paper
Operating: 10 to 90% RH
Storage: 10 to 90% RH, except for paper
181 × 186 × 278 mm {7.13 × 7.32 × 10.94"} (H × W × D)
Approx. 4.4 kg {9.7 lb}
*1
: ERC-43
English