cherubini TDS GOLD Einstellanleitungen Seite 27

To delete the WINDTEC sensor from the control unit, an already programmed remote
control must be used. The deleting sequence is the following:
A
+ B
To enable (automatically) or disable (manually) the sun sensor, a remote control with Sun/
Wind function must be used. Briefly press the SEL button: the remote control shows the
existing status (see symbols). To change the setting press again the button SEL for about
2 seconds until the motor performs a rotation sequence.
SEL
DELETING THE WIND- & SUN SENSOR
ENABLE / DISABLE THE SUN SENSOR
(WINDTEC LUX)
SEL
2 sec
display
A
Wind and sun sensor activated
Only wind sensor activated
Skipper
Skipper
27
set
2 sec
SEL
GB