cherubini TDS GOLD Einstellanleitungen Seite 23

SETTING THE FIRST REMOTE CONTROL
This operation can only be performed when the control unit is new, or after a total delete
of the memory.
T1: First remote control to be set.
During this step, power up only one control unit at time!
A
+ B
B B
T1 T1 T1 (2 sec)
SETTING THE ROTATION DIRECTION OF THE MOTOR
This operation is necessary if the rotation direction of the motor does not match to the UP
and DOWN buttons of the remote control.
If a Wind-sensor is connected, it's absolutely necessary and important to set the rotation
direction. (To avoid damage of the awning!!)
Setting the rotation direction using the button RESET/AUX:
max 2 sec
Interchanging the BROWN and BLACK motor wire on the terminals of the control unit,
will also reverse the rotation direction.
The control unit will keep this setting even after complete memory clearing!!
GB
23