Snooze Function; Radio Mode - Denver CRP-514 Bedienungsanleitung

Action (during data adjustment):
- Press << / Tune - (2) button to adjust data backward.
- Press >> / Tune + (6) button to adjust data forward.
- Keep depressed << or >> button for 2 seconds to enable auto forward.
- Use AL1 / AL2 set button to confirm each setting.
ALARM
Beep alarm or radio alarm will ring for 30 minutes if no key is pressed, then it will
stop automatically and wait for same alarm time on next day.

SNOOZE FUNCTION

- When Alarm rings, press Snooze button (10) to suspend the alarm & to
activate the snooze function, Beep or Radio alarm will stop. 9 minutes later
the alarm will ring again. Press SNOOZE key again, alarm will be suspended
again, another 9 minutes later the alarm will ring again and so on until the
next alarm rings.
Note: The interval time of the Snooze function is 9 minutes.
- If you want to disable the SNOOZE function and stop alarm completely,
press Radio ON/OFF button (10). If you don't press any button, the alarm will
ring during 30 minutes & stop automatically.
- Icon of AL1 and AL2 will blink as long as Snooze function is still operating.
Once Snooze is turned off icon of AL1 / AL2 stop blinking and lights on the
display.

RADIO MODE

Note: Ensure that the FM antenna is completely unrolled and extended to have
the best FM reception.
Press the Radio ON/OFF button (12) to turn the unit on.
Use the Tune - (2) or Tune + (6) button to select the desired radio station. If you
press and hold the Tune – (2) or Tune + (6) button for one second, then release,
the unit will automatically scan to the next broadcasting station.
Press the ON/OFF button (12) to turn the radio OFF.
To preset radio station
Press the Radio ON/OFF button (12) to turn the unit ON.
Use the Tune - (2) or Tune + (6) button to select the desired radio station.
Press the MEM.SET/M+ (11) button; "P01" will blink in the display.
Press the 'MEM.SET / M+' (11) button again to set the preset.
Repeat steps 2 through 4 to set more presets.
The unit can preset 10 stations totally for FM.
When "P01-P10" blinks, press Tune – (2) or Tune + (6) button to select the
preset number.
ENG-3