Contax 167MT Handbuch Seite 23

< Display panel>
This Display Panel lets you see all important shooting data such
as shutter speed and aperlure at a glance. Also, the exposure
mode, film speed and shutter speed are set with the Operating
Lever while watching this panel. lf you move the Operating Lever
to the right or left while pressing the MODE Button or ISO Button,
the data in the display panel will change. Remove your finger
f rom the lever when your desired mode or number appears in the
panel. The lever will return to the neutral position and set the
mode and the film speed/shutter speed that is displayed.
O Shutter Speed/Film SPeed
Normally, it displays the shutter speed.
However, the ISO indicator and film speed turn on when the ISO
Button is pressed. ln the shutter-priority auto exposure [v) and
manual exposure (M) modes, you can choose the desired shutter
soeed in 1-step increments with the Operating Lever alone.
@ Aperture Value
Like the aperture display in the viewfinder, it shows the shooting
aperture
O lSO Indicator
It turns on when the ISO Button is pressed and the batteries are
checked.
@ Film Rewind Mark
It turns on while the film is rewinding, and turns off after
rewinding is completed.
@ Exposure Counter
Shows the number of exposures of the film. lt also achieves the
following functions.
o Time display during bulb exposure (00-59).
o Display of the remaining time on self-timer (10-00).
. Display of the exposure sequence in automatic continuous
exposu re compensalron.
G) MODE Button
Set your desired mode by moving the Operating Lever to the right
or left while pressing the MODE Button.
You can choose the normal program (PROGRAM), high speed
program (PROGRAM HIGH), low-speed program (PROGRAM
LOW), aperture-priority (Av), shutter'priority (Tv), and manual (M)
exoosure mooes.
O ISO Button
Use this button for setting your desired film speed and for
checking the film speed that is set
35