Mounting and Connection Instructions LED- and LED/LCD Keypad for MB-Secure
8.
Final assembly
8.1
Fasten the keypad front
Fasten the keypad front with 4 screws at the spots marked
Fastening screws, access to open front panel
Fastening screws
Alarm
8.2
Label
Honeywell provides a special template in "
strips can be cut and inserted into the hollow spaces in the keypad front. (Each label corresponds to the
assigned function).
Recommendation:
Use paper > 80 g/m² for inlay strips (120 –180 g/m²).
The Word template "P00462-04-002-xx" can be downloaded from our homepage (Service / Down-load)
"www.honeywell.com/security/de".
8.3
Seal housing
Seal the housing after correctly mounting and testing the system. Press the VdS adhesive label (Item
No. 050097) over the 2 diagonally located screws.
on the housing case back.
x
®
MS WORD
" for the labels on the inlay strips. Printed inlay
3
17