Network Settings - AUDAC MTX48 Bedienungsanleitung

Settings >> Network settings
In this window, the network settings of the MTX can be adjusted. The IP address can be set
manually or can be automatically assigned by a DHCP server.
The IP address is standard set to 192.168.0.192 and the subnetmask is standard set to
255.255.255.0.
Be aware:
When a DHCP server is used in the network, and the DHCP function of the MTX is
enabled, the DHCP server automatically assigns an IP address to the MTX.
In some cases this can cause problems because the IP address is not always known for the
user, and the IP address is required to access the web based user interface. If you don't
know the IP address, the MTX will be lost in your network.
One additional problem is that, when the MTX boots the next time, the IP address that the
DHCP server assigns can be different.
The IP address can simply be changed by changing the value in the corresponding field.
After the IP address is changed, you will be automatically redirected to the newly changed
IP Address.
Click the "OK" button to confirm the network settings.
MTX Network settings screen
32