Asus RP-AC53 Schnellstartanleitung Seite 5

4. Follow the Quick Internet Setup steps below to set up the
Repeater:
• Connect to a Wi-Fi network and when prompted, enter the
security key. If your Wi-Fi network is hidden, click Manual
setting.
• You can either tick Copy AP SSID/Password, Use the default
setting or enter the SSID and security key/password for your
extended network. When done, click Connect.
NOTE: When you have ticked Use the default setting, the Re-
peater's wireless network name (SSID) changes to your existing
Wi-Fi network name, ending with _RPT or _RPT5G and shares
your router/AP's Wireless Password.
• Connect your wireless devices to the new Extender network.
Move the Repeater
When the connection is complete, locate the Repeater between
the router/AP and the wireless device to get better performance.
After placing your RP-AC53 in an ideal location, RP-AC53 con-
nects to your router/AP in about one (1) minute.
NOTES:
• Place your RP-AC53 between your router/AP and wireless
device to get the best extender performance.
• Place your RP-AC53 in a location where you can get green or
orange Wi-Fi LED.
IMPORTANT! We recommend that you place your RP-AC53 in
open or spacious location.
U11933_RP-AC53_QSG_V2.indb 5
Signal Indicator
• To get the best performance, place the Repeater between
your router/AP and wireless device.
• The Wi-Fi signal indicator indicates the connection perfor-
mance from the Repeater to the router/AP. Refer to the Wi-Fi
LED indicator in section A Quick Look.
Wi-Fi LED 2.4 GHz / 5 GHz performance
Green Best performance
Orange Good performance
Red Poor performance
5
2016/8/19 17:44:20