Connect IT CEP-9100-BK Benutzerhandbuch Seite 6

BLUETOOTH EARPHONES
Turn on
Open the charging box and take out the earbuds, the earbuds are automatically turned on, and the left and right earbud are
EN
automatically paired.
Paring Mode (Single earbud)
Open the charging box and take out the earbuds, find the paring name on the device, and pair it directly.
Paring Mode (Double earbuds)
Open the charging box and take out the earbuds, after the left and right earbuds connected automatically, find the pairing name
on the device, and pair it directly.
Attention:
The left earphone is primary and the name for pairing is CONNECT IT CEP-9100-BK, the right earphone is secondary and the
name for pairing is CONNECT IT CEP-9100-BK-R. Before use, remove the left earphone from the charging case and correctly
pair it with the mobile device, and then return the left earphone into the charging case; after that, remove the right earphone
from the charging case, pair it with the mobile device and then return it into the charging case. Afterwards, if you want to use
a single earphone then you can either choose the left (CONNECT IT CEP-9100-BK) or right (CONNECT IT CEP-9100-BK-R)
one; either of these will easily connect to your mobile device.
Turn off
Put the earbuds into the charging box, the earbuds automatically shut down.
Earbuds reset
1. Unpair both earbuds in Bluetooth section of your mobile phone first.
2. Take off both earbuds from the charging case.
3. Turn off both earbuds by pressing the multi-function button on both earbuds simultaneously for 20 seconds and hold it pressed
until any red or blue light goes out.
4. Press the multi-function button on both earbuds simultaneously and hold it pressed until red light flashes quickly three times on
both earbuds. Still keep it pressing until red light flashes quickly three times on both earbuds once more again. Be sure there's no
indication red or blue light on earbuds for 20 seconds.
5. Return the earbuds to the charging case until red light appears on both earbuds. Be sure charging case is charged at least at first
stage of battery indicator level.
CEP-9100-BK • CEP-9100-SL
CEP-9100-RD • CEP-9101-GD
USER MANUAL