Connect IT CEP-9100-BK Benutzerhandbuch Seite 5

BLUETOOTH EARPHONES
4
Control and recharging of the charging case
Determining the battery charge of the case:
In order to determine the battery charge of the case, press control button 6. A full charge is indicated by all 4 white LEDs being lit.
The LEDs can be turned off by double-clicking button 6.
The charging case can be recharged using the provided Micro USB cable and the charging USB adapter, which has an output of 5 V
and a current of at most 1 A (the adapter is not included, but you can use for instance a mobile phone adapter or the original CWC-2015
CONNECT IT adapter, sold separately).
During charging, 1 to 4 LEDs will be flashing, where the number of flashing LEDs corresponds to the current charge.
A full charge is indicated by all 4 white LEDs being permanently lit.
Automatic detection of charging function:
When the earbud is placed back in the charging box, the charging box automatically detects the earbud and charges the earbud.
Intelligent detection power-off function:
Charging box charging with Intelligent detection function, when the charging box detects that 2 earbuds are fully charged. The internal
boost circuit will be turned off after about 30 seconds to reduce the internal battery loss of the charging box.
Note:
The case can be recharged with or without inserted earphones.
5
Control and recharging of the earphones
Recharge the earphones by inserted them in the appropriate socket of the charging case – magnets are available to help fix the
earphones in place
Attention:
The left earphone needs to be inserted in the left part of the charging case (marked with an "L") and the right earphone needs
to be inserted in the right part (marked with an "R"). If the earphones are not placed in the correct slots in the charging case,
the fixation magnets will not polarize properly and it won't be possible to correctly insert the earphones.
CEP-9100-BK • CEP-9100-SL
CEP-9100-RD • CEP-9101-GD
USER MANUAL
EN