DJI MATRICE 200 Kurzanleitung Seite 3

Matrice 200
The DJI MATRICE 200 is a powerful system with world class agility and speed, two barometers and IMU modules each for
TM TM
maximum reliability, and new, smart flight features that make capturing complex shots easy. The aircraft's visual sensors enables
enhanced hovering precision even when flying indoors or in environments where GNSS is unavailable. The vehicle's new airframe
design improves the Ingress Protection Rating to IP43 in accordance with the global IEC 60529 standard.
The Matrice 200's mechanical design, along with quick-release landing gear and mounted folding arms, makes it easy to transport,
store, and prepare for flight. The Intelligent Flight Battery features upgraded battery cells and an advanced power management
system. The drone provides up to 27-minutes of flight with standard batteries and 38-minutes with optional batteries without payload*.
The Matrice 200 is compatible with many of DJI's DGC2.0 connector gimbals.* This manual uses the DJI ZENMUSE
example to demonstrate the Matrice 200's remarkable functions.
7
6
4 3
20
Folded
* Maximum run-time is tested in a lab environment. Performance may vary depending on local conditions.
Gimbal and optional batteries can be purchased separately from the official DJI Online Store.
DO NOT disassemble the aircraft case, otherwise, it will not be covered by the warranty.
2
5
1
2
10
11
8
9
1. FPV Camera
2. Forward Vision System
3. DJI Gimbal Connector V2.0
(DGC2.0)
4. Gimbal and Camera Detach
Button
5. Frame Arms
6. Motors
7. Propellers
8. ESC LEDs
9. Landing Gear
10. Upward Infrared Sensor
Z30 as an
TM
12 13 14
15
16
17
18
19
11. Aircraft Status Indicator
12. RC/Aircraft Link Button and
Indicator
13. USB Port
14. USB Mode Switch
15. Battery Remove Button
16. Intelligent Flight Batteries
17. Battery Level Indicators
18. Power Button
19. Downward Vision System
20. Micro SD Card Slot