Watchguard AP-Serie Kurzanleitung Seite 3

Pair the AP Device
You can now pair the WatchGuard AP device with a Firebox or XTM device.
1. Use Policy Manager or the Fireware XTM Web UI to edit the Firebox or XTM device configuration.
2. Select Network > Gateway Wireless Controller.
3. Enable the Gateway Wireless Controller, and save the configuration to the Firebox or XTM device.
4. In the Gateway Wireless Controller configuration, on the Access Points tab, click Refresh to
discover the AP device.
5. Select the unpaired Access Point and click Pair.
6. In the Pairing Passphrase dialog box, type the passphrase of the AP device. The default
passphrase is wgwap.
For detailed information about WatchGuard AP pairing, management, and configuration with your Firebox
or XTM device, see the WatchGuard AP Device Setup section of the product Help at
http:www.watchguard.com/help/documentation/xtm.asp
2