Notes About Dante; Names And Functions Of Parts; Rear Panel - Tascam IF-DA2 Bedienungsanleitung

Notes about Dante

Dante is a transmission protocol developed by Audinate. Using
networks based on gigabit Ethernet standards, it enables multi-
channel (512 IN/512 OUT) transmission and high precision, for
example.
Check the Audinate website for details about Dante.
https://www.audinate.com/
i This card includes a Dante module circuit board made by
Audinate. See "Software Licensing" on page 63 for details
about the open source software used by the Dante module
circuit board.

Names and functions of parts

This card has RJ-45 connectors that support 100Mbps Ethernet.
Use LAN cables to connect these connectors to other devices that
support Dante or a Dante network.

Rear panel

RJ-45 connector
1
This is the main Dante transmission connector.
Use this to connect to a Dante network all the time.
Link status/activity indicator
2
Green indicates that a link is established between the
devices.
Blinking indicates that signals are being transmitted between
the devices.
100Mbps link status indicator
3
Orange indicates that a 100Mbps Ethernet link has been
established.
7
TASCAM IF-DA2