Sensitivity Setting - Silvercrest HG03107 Montage-, Bedienungs- Und Sicherheitshinweise

VIDEO
SETTINGS
WI-FI SETTINGS
frequency band Wi-Fi router .
SENSITIVITY
SETTING
selected .
This feature is used to send a notification prompt to the user when motion is
detected by the camera . Detected events are saved on the microSD card and
are displayed in the "Events" list .
PUSH NOTIFY
SETTINGS
your smart device and enable notifications for this app:
Settings
After the setting is finished, launch the live view and check if the changes have
been applied .
Low Light Enhancement
This function is intended for improving the night video quality by setting
5 different light levels (5 = brightest) .
Image Orientation
This function is intended to change screen orientation . When the camera
is installed on a ceiling, make sure to select the "Flip" option .
Choose the Wi-Fi network for wireless connection with the camera .
NOTE: The camera can only connect to a 2 .4 GHz (802 .11b/g/n)
Detect Mode
Set camera's detection mode:
1 . Off
2 . Software – Select to use software detection algorithm for motion
triggered recording factor . The software algorithm will track and
detect all minor/major movements that cause changes of picture .
Motion Detection
Set the sensitivity of motion detection during day and night .
Motion Mask
Choose the image areas which should not detect motion .
NOTE: The above 2 options are available only if "Software" mode is
Notify Enable
Enable/disable push notification to your smart device .
Notification Name
Set the name of the camera used to send the push notification .
NOTE: If the push notifications do not work, go to notifications settings on
Notifications Silvercrest IP CAM S-K 1920 Allow Notifications .
GB/IE 41