Installation - Maestro MR 927 Bedienungsanleitung

Drill two holes in wall and have a distance of above 2.0m from the ground, the diameter of the hole just
contained the expansion bolt, which the diameter is 6mm. After tucked the expansion bolt, fixed pothook
on the expansion bolt with screw. Make sure pothook should be inserted the bottom. See the drawing as
following for a better understanding. (see the picture).
Use the machine' s components (screws and expansion pipe) fix on the wall
as following figure, then mounted the machine.
1. The distance between the product and the ceiling(and the side) should be ≥30cm.
2. Product installation size see Figure.
Note: when the product is installed, The hook (screw) is aligned with the hole «A» on the product. After
hanging, must be moved to the «B», in order to firmly fix
When to remove the product, must be moved from «B» to «A» then take out.
Usage:
1. Please make sure the capacity
should be AC220-240V, 50-60Hz
2. Put the plug in the wall socket.
3. Switch the appliance on by
selecting the desired setting
6

INSTALLATION

Note: max weight is 4.1kg, the wall s
hould be able to carry this weight.