Maintain The 3410 And 5410N; Overview; Cautionary Information; Preventative Maintenance Schedule - Rimage Professional 5410N Benutzerhandbuch

Maintain the 3410 and 5410N

This section provides maintenance information for the 3410 and 5410N
systems, including the integrated Everest 400 printer.
Important! For optimum performance, keep the 3410 and 5410N in a clean,
dust-free environment.

Overview

Regular preventative maintenance of your system can help to ensure error-
free recordings and clean printed labels. Maintenance involves cleaning the
system.
For information on autoloader and printer maintenance, refer to the Rimage
Professional 3410 and 5410N User Guide that was included with your
autoloader.

Cautionary Information

Caution: To avoid damaging the 3410 or 5410N during maintenance:
n
• Never use oils, silicone, or other lubricants on any part of the system.
• Use only non-abrasive cleaners to wipe down the surfaces of your
system.
• Use only a damp cotton cloth to wipe off the touch screen.
• Never use cleaners to clean the embedded PC.
• Avoid pouring cleaners directly onto the autoloader. Instead, apply
the cleaner on a clean, lint-free cloth.

Preventative Maintenance Schedule

Task Tools
Autoloader Maintenance
Wipe down the lift arm shaft Lint-free cloth
and pay close attention to:
• The area around the base of
the shaft
• The area just above the lift
arm
Task
Autoloader Maintenance
Wipe down all surfaces of the
autoloader, including:
• Sides and
• Door
• Output bin
Remove dust and debris from
the fan at the back of the
autoloader.
Remove dust and debris from
the openings at the back of
the autoloader.
Remove dust and debris from
the front and inside of the
autoloader.
Integrated Everest 400 Printer Maintenance
Clean the print head. Refer
to the
section on page 26.
Clean the tacky rollers. Refer
to the
section on page 27.
Frequency Clean the sensors. Refer to the
Clean the Sensors
page 28.
Weekly
For more information visit rimage.com/support
Tools
• Lint-free cloth
• Non-abrasive, all-
• Carousel
purpose cleaner
top
• Top surface
on the lift
arm
Can of compressed air
Vacuum
Can of compressed air
• Sponge swabs with long
Clean the Print Head handles (included in the
Everest cleaning kit)
• 99% Isopropyl alcohol
• Sponge swabs with long
Clean the Tacky Rollers handles (included in the
Everest cleaning kit)
• 99% Isopropyl alcohol
• Sponge swabs with long
handles (included in the
section on
Everest cleaning kit)
• 99% Isopropyl alcohol
Frequency
Weekly
Monthly
Monthly
Monthly
After 2000 discs
(as needed) or
at every ribbon
change
After 2000 discs
or at every ribbon
change
Refer to the
Clean the Sensors
section on page
28.
25