Set Your Printing Preferences On A Windows Pc; Access Printing Preferences; Access Printing Preferences Through The Windows Start Menu; Access Printer Preferences Through Cd Designer Software - Rimage Professional 5410N Benutzerhandbuch

Set Your Printing Preferences on a Windows PC

This section provides the information needed to set up your printing
preferences and check the amount of print and retransfer ribbon remaining
using a Windows PC. Printing preferences allow you to set up the integrated
Everest 400 printer to produce the best possible labels on your discs.
Important! Unless otherwise indicated, all Windows navigation statements
are Windows 7 paths. Other Windows operating system navigation may
differ slightly.

Access Printing Preferences

Use one of the procedures below to access the Everest 400 Printing
Preferences window.
Access Printing Preferences through the Windows Start
Menu
When you use this method, the printing preferences are saved in the printer
driver settings and are applied to all newly created labels. These become
your default printer settings.
1. Select: Start > Devices and Printers.
Tip: In Windows XP, select Start > Printers and Faxes. Navigational
statements for Windows Server 2008 R2 will be the same as Windows 7.
2. Right-click the Rimage Everest 400 printer. The dropdown menu
displays.
3. From the dropdown menu, select Printing Preferences. The Rimage
Everest 400 Printing Preferences dialog box opens.

Access Printer Preferences through CD Designer Software

When you use this method, the printing preferences are saved with the label
file and are used instead of the printer driver settings for this label.
1. Open the desired label file in CD Designer.
2. From the File menu, select Print. The Print window opens.
3. From the Name dropdown list, select the Rimage Everest 400 printer.
2002552_B
4. Select the Document Properties button. The Rimage Everest 400

Access Printer Preferences for Printing PDF Files

Use the procedure below to access and set printing preferences for PDF files.
Important! When you use this procedure, the changes to the settings are
global and apply to all PDF labels.
1. Select: Start > Devices and Printers.
2. Right-click on the Everest 400 printer. The dropdown menu displays.
3. From the dropdown menu, select Printer Properties. The Rimage
4. From the Rimage Everest 400 Properties dialog box, select the Advanced
5. At the bottom of the Advanced tab, select Printing Defaults... The
For more information visit rimage.com/support
Tip: The Rimage Everest 400 printer may display as the default printer.
Properties dialog box opens.
Tip: In Windows XP, select Start > Printers and Faxes. Navigational
statements for Windows Server 2008 R2 will be the same as Windows 7.
Everest 400 Properties dialog box opens.
Tip: In Windows XP, select Properties from the dropdown menu.
tab.
Rimage Everest 400 Printing Defaults dialog box opens.
15