Werbung
Setting and start
Please remove all foreign objects like: roots,
stones, branches, toys etc. from the lawn.
Setting:
After installation and charging, you are now ready to do the setting.
1. Adjust the cutting height by turning the
dial (1)
Notice the numbers on dial and stop at your desired height.
2. Insert the security key (2).
Notice the shape of the security key and make sure you insert it correctly.
Note: without the key, all buttons on control panel are inoperable except the power switch. So any
time you want to manually operate the panel, don't forget to insert the security key.
3. Press the power switch on "I" to turn on the robot (3)
Before going further, it's better to wait 1-3 seconds so that all electronic parts have been powered up.
4. Choose size of your lawn (4)
300 m
2
: 4h running time, every 2 days, charging time included.
600 m
2
: 8h running time, every 2 days, charging time included.
1000 m
2
: 12h running time, every 2 days, charging time included.
5. Press Start (5)
The timer counts from the moment you press the START button, then cutting will repeat in 48h intervals,
which means the robot will go out cutting at the same moment every other day (every 2 days).
You may remove the security key after starting to avoid that other people change the setting, and if
you want the robot mower to be theft-proof.
1
10
MANUAL · MR40Z
6
Start
The robot is now ready to mow.
Note! If the grass is higher than 60 mm we recommend that you first mow it with a traditional lawn mower
– or with the robot mower set in its highest cutting position.
Automatic mowing:
After choosing the size of your lawn as indicated above, you press the START-button. The robot mower will
start by cutting alongside the boundary wire. The second time the robot leaves the docking station, it will mow
randomly in straight lines until there is 20% left of the battery, where after it returns to the docking station
for recharging. After 1 hour's recharging, the robot continues cutting periodically until it has worked the total
number of hours corresponding to the chosen size of lawn. Then it returns to the docking station.
Other buttons:
STOP-button (6):
You can stop the robot mower at any time by pressing the emergency STOP-button.
Note: Emergency STOP button will not interrupt your initial setting.
Restart on the lawn after pressing STOP button must take place in maximum 2 meters distance from
boundary wire with security key inserted.
HOME-button (7):
While cutting, you may activate the "HOME" button and the robot mower will return to the docking station.
NB: The HOME button will not interrupt your initial setting.
START/RESTART-button:
Restart must take place with security key inserted at a max. 2 meters distance to boundary wire.
Choose the Same Area button as your initial setting and then press the START button. Once you restart the
robot mower inside the docking station, a new time cycle will begin.
NB: In case there is no light on the indicator of the mower, the machine has run out of power and can only
be restarted in the docking station.
4
3
MANUAL · MR40Z
2
7
5
11
Werbung
Kapitel
