deville C07783 Bedienungsanleitung Seite 17

(Assembling the deflector : perform the disassembly operation in the reverse order).
- Check thoroughly the state of the appliance and particularly the elements ensuring sealing : locking joints and
devices, supporting parts (door, frame).
- Check the state of the smoke duct and connecting duct : all the connections must show proper mechanical
resistance and sealing.
- Clean the appliance using a brush and a vacuum cleaner.
In the event of an anomaly : have the appliance repaired or the installation performed by a qualified professional.
After a long off-period :
- Check that nothing obstructs any pipes before using the stove again.
CURRENT MAINTENANCE
- Clean the window door using a damp cloth and ash. If required, use an adapted household cleaning product by
observing the instructions of the operation manuals. Wait for the appliance to be completely cooled before
proceeding with this operation.
- Clean regularly the ventilation guides :
. Using the tip of a metallic object , scratch the inner edges of the cast iron to remove the soot
which may have formed (Fig. 10).
. Remove from the hoover  the particles and dust that are stuck between the air guide and the
window pane (Fig. 11). If necessary slip a fine blade or a rigid carton sheet between the air
guide and the window pane to ease the cleaning (releasing of the particles).
These particles prevent the forming of the secondary air layer which protects the window from direct contact
with the smoke and completes the combustion of the wood (Fig. 12).
 Secondary air
 Air guide
 Glass
 Door
. These operations must be performed whenever the window is dirty and systematically following the
total extinction of the hearth.

Check the efficiency of the bolt of the door, and if necessary make the following adjustment (Fig. 13) :
- To harden door closure :
. Successively tighten screw  and tighten screw .
. Turn both screws ¼ turn and repeat the operation as required.
NOTA : This adjustment increases the pression of the watertightness joint of the door on the
equipment.
- To soften door closure :
. Successively loosen screw  and loosen screw .
. Turn both screws ¼ turn and repeat the operation as required.
NOTA : This adjustment reduces the pression of the watertightness joint
equipment.
CLEANING OF THE STOVE DECOR
The cleaning of the stove casing – chrome aspect – must be carried out with a soft cloth and soapy water, or
with a product for glass without alcohol.
17
of the door on the