Product Description - Enerpac HXD-Serie Bedienungsanleitung

1
1.0 RECEIVING INSTRUCTIONS
Visually inspect all components for shipping
damage. Shipping damage is not covered by
warranty. If shipping damage is found notify
carrier at once. The carrier is responsible for
all repair and replacement costs resulting
from damage in shipment.
S
AFETY FIRST
Read all instructions, warnings and cautions
carefully. Follow all safety precautions to
avoid personal injury or property damage
during system operation. Enerpac cannot be
responsible for damage or injury resulting
from unsafe use of product, lack of
maintenance or incorrect product and/or
system operation. Contact Enerpac when in
doubt as to the safety precautions and
applications. To protect your warranty, use
only enerpac hydraulic oil.
A CAUTION is used to indicate correct
operating or maintenance procedures and
practices to prevent damage to, or
destruction of equipment or other property.
A WARNING indicates a potential danger
that requires correct procedures or practices
to avoid personal injury.
A DANGER is only used when your action or
lack of action may cause serious injury or
even death.
This icon is used in illustrations to
express WRONG, not allowed and
dangerous product use and application.
This icon is used in illustrations to
express the CORRECT, safe product
use and application.
A box around a number or letter, such as
B1
and , refers to an illustration or table
number in this instruction sheet.

2.0 PRODUCT DESCRIPTION

The Enerpac HXD torque wrench is a
double-acting hand-controlled hydraulic tool
designed to tighten and loosen bolted
connections. Any unauthorized change in
design, construction or usage of the torque
wrench is forbidden for safety reasons and
will void the Enerpac warranty.
2
1