Safety Instructions; General Guidelines; User Manual - HQ Power VDLL24ST2 Bedienungsanleitung

1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle
could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal
waste; it should be taken to a specialized company for recycling. This device should be returned
to your distributor or to a local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing HQPOWER™! This stroboscope features an adjustable flash rate. Please read the
manual thoroughly before bringing this device into service. If the device was damaged in transit, don't
install or use it and contact your dealer.
For more info concerning this product and the latest version of this manual, please visit our
website www.hqpower.eu.

2. Safety Instructions

Be very careful during the installation: touching live wires can cause life-threatening
electroshocks.
Do not touch the device during operation as the housing heats up.
Keep this device away from rain and moisture.
Unplug the mains lead before opening the housing.
 Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and
the dealer will not accept responsibility for any ensuing defects or problems.
 A qualified technician should install and service this device.
 Do not switch the device on immediately after it has been exposed to changes in temperature. Protect
the device against damage by leaving it switched off until it has reached room temperature.
 This device falls under protection class I.
 Make sure that the available voltage does not exceed the voltage stated in the specifications of this
manual.
 Do not crimp the power cord and protect it against damage. Have an authorised dealer replace it if
necessary.
 Disconnect the device from the mains to clean it or when it is not in use. Handle the power cord by the
plug only.
 Do not look directly at the light source as sensitive people may go into epileptic seizure if they do.
 Keep the device away from splashing and dripping liquids. Never put objects filled with liquid on top of
the device.
 Note that damage caused by user modifications to the device is not covered by the warranty.
 Mechanical wear is not covered by warranty.
 Keep the device away from children and unauthorised users.

3. General Guidelines

Refer to the Velleman
 This device is designed for professional use on stage, in discos, theatres, etc. The VDLL24ST2 should
only be used indoors with an alternating current of 230 VAC ~ 50 Hz.
 Lighting effects are not designed for permanent operation: regular operation breaks will prolong their
lives.
 Do not shake the device. Avoid brute force when installing or operating the device.
 Select a location where the device is protected against extreme heat (see "Technical
Specifications"), dust and moisture. Respect a minimum distance of 0.5 m between the device's light
output and any illuminated surface.
 Use an appropriate safety cable to fix the device (e.g. VDLSC7 or VDLSC8).
V. 02 – 27/10/2014

USER MANUAL

® Service and Quality Warranty on the last pages of this manual.
VDLL24ST2
2 ©Velleman nv