Control Panel - HQ Power HQLP10005 Bedienungsanleitung

4.3 Connection

Have a qualified electrician carry out the electric connection.

Connect the device to the mains with the power plug. All devices must be powered
directly off a grounded switched circuit. Do not connect to a dimmer pack.

The installation has to be approved by an expert before the device is taken into
service.
5. Overview
Refer to the illustrations on page 2 of this manual.
1 DMX input
2 power input
6. Operation
The device can be used in the following modes:

stand-alone mode

master/slave

with a DMX-512 controller.
6.1

Control Panel

Access the control panel functions using the four panel buttons located around the display.
Menu scroll through the menu options
upwards through the menu list
downwards through the menu list
Enter confirm a selection
6.2 Menu
mode
DMX mode
static colours
auto mode
sound mode
speed
mic sensitivity
edit colour
dimming
silent scene
slave
IR
V. 02 – 04/10/2017
HQLP10005
programme
4-1CH
Addr
Stat S01-17
Auto Au1-2
Soun So1-2
SPEE SP1-9
SEnS SE1-9
r000-255
g000-255
Colo
b000-255
U000-255
dIMM
SILE on/oFF
SLAV
InFr on/oFF
3 display and menu buttons
4 microphone
8CH
4CH
3CH
2CH
dl1-9
silent scene at sound programme
Slave
8
description
d001-d512
static colours
auto programme
sound programme
speed
microphone sensitivity
red 0-100 %
green 0-100 %
blue 0-100 %
white 0-100 %
master dimming
slave mode
enable/disable IR remote
©Velleman nv