Control Panel - HQ Power VDPLOW608 Bedienungsanleitung

Mounting the Device
This device is intended for floor mounting only. Please make sure to use the appropriate tools to install the
device. Tools, mounting bolts and nuts are not included.
DMX-512 Connection
 When applicable, connect an XLR cable to the female XLR output of a controller (not incl.) and the other
side to the male XLR input of the device. Multiple devices can be linked through serial linking. The linking
cable shall be a dual core, screened cable with XLR input and output connectors.
 A DMX terminator is recommended for installations where the DMX cable has to run a long distance or is in
an electrically noisy environment (e.g. discos). The terminator prevents corruption of the digital control
signal by electrical noise. The DMX terminator is simply an XLR plug with a 120 Ω resistor between pins
2 and 3, which is then plugged into the XLR output socket of the last device in the chain.
6. Operation
The device can be used in the following modes:
 stand-alone mode with automatic programme
 master/slave
 with a DMX-512 controller.
6.1

Control Panel

Access the control panel functions using the four panel buttons located below the display.
Button Function
MENU to access the menu, quit the current function without saving the setting, or quit the menu
UP to scroll upward in a list of functions or options, or increase a value
DOWN to scroll downward in a list of functions or options, or decrease a value
ENTER to confirm and save a selected option or value
6.2 Menu
main menu mode
Addr
A001
CH-- P001
F001
rL--
gL--
bL--
EL--
FLAS
FAdE
ASC-
AuTo
dELy
V. 00 – 09/03/2015
value
/ 001-511
/
/
/
/ 001-100
/ 001-100
/ 001-100
/ 001-100
/ 001-100
/ 001-100
/ 001-100
/ 001-100
/ 0-3
VDPLOW608
function
DMX address code setting
4-channel mode (R, G, B, W)
5-channel mode (dimmer, R, G, B, W)
7-channel mode (R, G, B, W, strobe, macro, dimmer)
red
green
blue
white
strobe speed from slow to fast
fade in and out from slow to fast
colour speed
auto programmes
display backlight delay
5 ©Velleman nv