Cleaning And Maintenance - HQ Power VDPL2201MHW10 Bedienungsanleitung

6. Use
MODE 1: d001 is the default mode. Receive the DMX512 signal and set the desired address via the UP/DOWN
buttons.
Select channel between 1 and 245.
MODE 2: Press the MODE/ESC button until the displays shows
via the UP/DOWN buttons.
is the slave mode. Press the ENTER button to confirm the function;
will change to
MODE 3: Press the MODE/ESC button until the display shows
UP/DOWN buttons.
confirm the desired function. The display will indicate the "DMX" or "MASTER/SLAVE" mode that you
selected before.
MODE 4: Press the MODE/ESC button until the display shows
UP/DOWN buttons.
confirm the desired function. The display will show the "DMX" or "MASTER/SLAVE" mode that you
selected before.
MODE 5: Press the MODE/ESC button until the display shows
UP/DOWN buttons.
button to confirm the desired function. The display will indicate the "DMX" or "MASTER/SLAVE" mode that
you selected before.
MODE 6: Press the MODE/ESC button until the display shows
UP/DOWN buttons.
button to confirm the desired function. The display will indicate the "DMX" or "MASTER/SLAVE" mode that
you selected before.
MODE 7: Press the MODE/ESC button until the display shows
MODE 8: Press the MODE/ESC button until the display shows
mode.

7. Cleaning and Maintenance

1. All screws should be tightened and free of corrosion.
2. The housing, visible parts, mounting supports and the installation location (e.g. ceiling, suspension, trussing)
should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting supports, do not
change the location of the connections.
3. Moving mechanic parts must not show any signs of wear and tear.
4. The electric power supply cables must not show any damage. Have a qualified technician maintain the device.
5. Disconnect the device from the mains prior to maintenance activities.
6. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
7. Contact your dealer for spare parts if necessary.
VDPL2201MHW10
is the master auto mode,
and will change to
master mode => master auto mode
master mode => master sound control mode
slave mode => slave
is the pan mode and
is the tilt mode and
is the normal mode and
is the power ON mode and
is the master sound mode control and
.
and select the desired function via the
is the invert pan mode. Press the ENTER button to
and set the desired function via
is the invert tilt mode. Press the ENTER button to
and select the desired function via the
means the display is inverted. Press the ENTER
and select the desired function via the
is the power OFF mode. Press the ENTER
. Press the ENTER button to reset the system.
. Press the ENTER button to return to the default
6
and select the desired function
will change to ,
HQ POWER