Ugur UDD 100 SC Bedienungsanleitung Seite 48

D- USING YOUR PRODUCT
Using digital thermostat
If the product you've purchased is equipped with a digital thermostat, please pay attention to the following matters.
Digital thermostats are factory set and do not require any setting. You can change the thermostat setting as shown
below.
Digital thermostats contain many programs (such as eco mode, night mode). If you believe that there is a problem in
your product related to the operation or cooling, please consult to authorized service.
Error codes given by the digital thermostats are under the troubleshooting title. When you encounter these error codes,
stop thermostat alarm and call Authorized Uğur Service.
Turns on/off your cooler.
For Carel Thermostat;
EN
Mutes alarm.
Manuel defrost.
Shifts to economic mode and night mode.
Temperature is increased by pressing this button after
pressing set button.
It allows setting the device temperature. It is activated
when set button is pressed for 2-3 seconds.
Temperature is decreased by pressing this button after
pressing set button.
Programming key. Only used by service personnel.
Product on/off function. Temperature is increased by
pressing this button after pressing set button simul-
taneously.
Ensures manuel defrost of the product. Temperature
is decreased by pressing this button after pressing set
button simultaneously.
It allows setting the cooler temperature. It is activated
when set button is pressed for 2-3 seconds.
48