Operation; Weighing; Tare Function; Switching Off The Scales - ADE Alessia KE 1600 Bedienungsanleitung

Operation

Operation

Weighing

1. Place the scales on an even, firm, and dry surface. Carefully position the scales in
order to avoid hard impacts to the sensors/feet and therefore to avoid damage.
2. Switch the scales on by briefly tapping on ON/OFF. "HI" is shown on the display.
3. Select - while „HI" is displayed - the desired unit of measure by repeatedly tapping
ON/OFF.
Your options are: "g" (grams), "lboz" (pounds), "ml" (millilitres) and "floz" (fluid
ounces). Pay attention to the indicator on the display.
Choose "ml" or "floz" when you want to weigh liquids.
4. If you want to weigh something in a container, now place the container without
anything in it onto the weighing surface. Otherwise, proceed as described in
point 6.
5. Press ON/OFF.
Depending on the measuring unit chosen, "0 g", "0: 00 lboz", "0 ml" or "0: 00 floz".
6. Put the substance to be weighed in the container or place it on the weighing
surface. The measured weight is shown on the display.
7. Read off the measured weight and remove the item or substance from the
container or the weighing surface.

TARE Function

This function is practical, for example, when baking, if you would like to add another
ingredient to the ingredients already on the scales.
1. Press TARE in order to set the scales back to "0".
2. Add the new substance. The weight of the added substance is shown on the display.
3. Repeat the process whenever you want to add more ingredients. The process can
be repeated as often as needed until the capacity limit (5 kg) is reached.

Switching off the scales

− Hold down ON/OFF until the indicator on the display goes out.
The scales automatically switch off if they are not used for approx.
180 seconds.
18
Kitchen Scales KE 1600