GRAPHITE PRO 59GP800 Betriebsanleitung Seite 17

TRANSLATION OF THE ORIGINAL INSTRUCTIONS
CAUTION: BEFORE USING THE POWER TOOL READ THIS MANUAL CAREFULLY AND KEEP IT FOR FUTURE
REFERENCE.
PRECAUTIONS FOR USING ELECTRIC DEMOLITION HAMMER
Caution:
Unplug the power cord from mains socket before commencing any activities related to repair or
maintenance.
● Use hearing protection measures during work. Exposure to noise may cause hearing loss.
● Use the power tool with additional handles supplied with the power tool. Loss of control may
cause operator injury.
● Whenever tool can hit hidden electric wires during operation, hold the power tool only by
insulated handles. Contact with electric wire may transfer voltage to metal parts of the power tool
and cause electric shock.
● Use proper equipment to locate hidden power lines. Contact with live wires may cause fire or
electric shock. Damage of gas installation pipe may cause explosion. Ingress to water line may cause
electric shock and cause major property damage.
● Each time before connecting the power tool check the power cord, in case of damage hand over
to authorized workshop for replacement.
● When operating the power tool hold it in both hands while keeping stable body position. Keep
the handles clean. Power tool is safer when held with two hands.
● When operating the power tool held high, stand firmly on the ground and ensure there are no
bystanders below.
● Do not direct operating power tool at other persons or at yourself.
CAUTION: This device is designed to operate indoors.
The design is assumed to be safe, protection measures and additional safety systems are used,
nevertheless there is always a small risk of injuries at work.
Explanation of used symbols
1 2
1. Read instruction manual, observe warnings and safety conditions therein.
2. Device with class II insulation.
3. Use personal protection measures (protective goggles, earmuff protectors, anti-dust mask)
4. Disconnect the power cord before starting maintenance or operation.
5. Protect against rain.
6. Keep the tool away from children.
CONSTRUCTION AND USE
Demolition hammer is a hand-operated power tool with insulation class II. The tool is driven by single-
phase commutator motor with rotational speed reduced with gear transmission. Power tools of this type
are widely used for works in concrete, brick and similar materials. Range of use covers renovation and
construction works.
Use the power tool in accordance with the manufacturer's instructions only.
DEMOLITION HAMMER
59GP800
DETAILED SAFETY REGULATIONS
3 4 5 6
17