Herunterladen Inhalt Inhalt Diese Seite drucken

Easy Maintenance And Cleaning; J2 Plus Cushion Warranty - Sunrise Medical Jay J2 Plus Gebrauchsanweisung

Vorschau ausblenden Andere Handbücher für Jay J2 Plus:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 12
M a i n t e n a n c e a n d C l e a n i n g
8

EASY MAINTENANCE AND CLEANING

Monthly cleaning and regular maintenance may help extend the life of your cushion
To Clean Cover
Remove the cover and turn it inside out. Close the zipper and machine wash on warm
cycle and drip or tumble dry on low heat. Do not use industrial dryers. Do not steam
autoclave. Do not bleach.
NOTE– When the cover is removed from the cushion for cleaning, inspect the fluid pad or foam
inserts and foam base for unusual wear. Feel the fluid for any inconsistencies. If inconsis-
tencies are found, knead the fluid pad to original consistency and/or call your Sunrise
Medical supplier.
To refit cover after washing, reinstall any accessory items or fluid / foam inserts, then
fit the cover back over the foam base and urethane encased foam overlay. Ensure the
back of the cover matches up to the back of the foam base.
Use only Jay designated covers on Jay products
To Clean Foam Base
Remove the cover, urethane encased foam overlay pad, and any accessory parts from
the foam base. Wipe with warm water and soap. Wipe off with a clean cloth.
NOTE– Avoid submersion of the foam base in water
Reinstall the urethane encased foam overlay pad, and any accessory parts, then fit
cover back over complete assembly. Ensure the back of the cover matches up to the
back of the foam base.
To Clean the Urethane Encased Foam Overlay Pad
Remove the cover from the complete assembly. Remove the overlay and wipe with
warm water and soap. Wipe off with a clean cloth.
NOTE– Do not submerge in water. Water may be absorbed into the foam through the air vents on
the top of the pad or through the rear Velcro closure.
Reinstall overtop of the foam base, and fit the cover back over the complete assembly.
Ensure the back of the cover matches up to the back of the foam base.
XT300005 Rev. B
W a r r a n t y

J2 PLUS CUSHION WARRANTY

Each Jay J2 Plus Cushion is carefully inspected and tested to provide peak perfor-
mance. Every Jay J2 Plus Cushion is guaranteed to be free from defects in materials
and workmanship for a period of 24 months from the date of purchase provided normal
use. Should a defect in materials or workmanship occur within 24 months from the
original date of purchase, Sunrise Medical will, at its option, repair or replace it with-
out charge. This warranty does not apply to punctures, tears or burns, or to the cush-
ion's removable cover. Claims and repairs should be processed through the nearest
authorized supplier. Except for express warranties made herein, all other warranties,
including implied warranties of merchantability and warranties of fitness for a particu-
lar purpose are excluded. There are not warranties, which extend beyond the descrip-
tion on the face hereof. Remedies for breach of express warranties herein are limited
to repair or replacement of the goods. In no event shall damages for breach of any
warranty include any consequential damages or exceed the cost of non-conforming
goods sold.
9
XT300005 Rev. B

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis