Technical Specifications - Velleman CAMCOLBUL11 Bedienungsanleitung

• STEP 3
Fix the camera onto the bracket. Adjust the angle and fasten. Adjust the
sun shield. Pass the video/power cable through the hole and proceed
with the electric connection.
• STEP 4
Connect the video/power cable (A) of the camera to the video/power cable (B) of the adapter. Connect the
camera power lines (C) to a power cable (D, not incl.) (white = +, black = -). Twist the braids together, solder
and cover with insulation tape or heat-shrinking tubes.
• STEP 5
Connect the video cable to a monitor video input with a 75 coaxial cable.

4. Technical Specifications

Pick-Up Element
Pixels
Resolution
Min. Illumination
IR LEDs
Effective Range
S/N Ratio
Electronic Shutter
Lens
Lens Angle
D&N Filter Control
Line Lock
Iris Mode
White Balance
Video Output
Microphone
IP Rating
Power Supply
Power Consumption
Dimensions
Total Weight
Use this device with original accessories only. Velleman nv cannot be held responsible in the event of
damage or injury resulted from (incorrect) use of this device.
For more info concerning this product, please visit our website www.velleman.eu.
The information in this manual is subject to change without prior notice.
CAMCOLBUL11
1/3" colour CCD image sensor
500 (H) x 582 (V)
350 TV lines
0.25 lux/F1.4
24
± 20m
> 48dB
1/60 (1/50) to 1/100000s
f6.0/F1.4
56°
built-in IR filter
yes
AES
ATW
1.0Vp-p composite, 75
no
IP67
100~240VAC +/- 10%
max. 5W
112 x 82 x 75mm
775g
- 4 - VELLEMAN