Technical Specifications - Velleman CCTVPROM11 Schnelleinstieg

Quick menu bar
Note: only available when USB mouse is connected.
• Move the pointer towards the left of the monitor to open the quick menu bar.
Recording
•
Check whether the camera(s) is (are) properly connected and a HDD is present inside the device.
•
When the auto-recording and pre-alarm functions are enabled, the device will start recording images.
•
Default the recording icon (
•
In case the motion or alarm detection is activated and a motion or alarm is detected, the motion (
alarm ( ) icon is shown.
•
When timed recording is enabled, the timed recording icon (
on.
•
Default, the device is in HDD overwrite mode and the icon (
Play-back
•
Make sure the control panel is not locked and press the PLAY button on the control panel or use the quick
menu bar to open the playback control panel.
A
B
C
Note: play-back needs at least 8192 recorded images to work properly (e.g. with IPS=30, the recording must
be at least 273 seconds long).
•
The fast forward (FF) and fast rewind (REW) buttons will increase resp. decrease the play-back speed.
Repeatedly pressing the button will increase/decrease speed to 4x, 8x 16x or 32x (max.).
•
Press the PAUSE button to temporary suspend video play-back.
•
Press the STOP button to return to live monitoring.
•
Press the SLOW button once to set play-back speed to 1/4
Search
•
There are four ways to search recorded files: by record list, motion list, alarm list or by timer list.
•
To search an event, press the LIST button on the front panel (make sure the control panel is not locked). An
overview of the recorded file types (ALARM, MANUAL, MOTION, SYSTEM and FULL LIST) is shown.
•
Select the desired list and recording from the list.
•
Press ENTER to start play-back.
Note: the recorded files can also be searched via the included Video Viewer software or Internet Explorer.

9. Technical specifications

DVR
video system
video compression
video input
video output
maximum recording rate (PAL)
V. 03 - 17/01/2012
All manuals and user guides at all-guides.com
CCTVPROM11
Open channel switch panel.
Show playback control panel.
Zoom-in mode (select desired channel first before entering zoom-mode).
Select audio channel (live mode only live channels can be selected).
Enter PTZ mode and show PTZ control panel
) is shown.
progress bar
playback control
event search
PAL
H.264 (CIF)
4 channels, composite video signal 1Vpp / 75 ohms BNC
composite video signal 1Vpp / 75 ohms BNC + VGA
frame 704 x 576 pixels with 25 IPS (PAL)
) is showed and the timed recording LED is
) is shown.
D information
E close
th th
and twice for 1/8
9
) resp.
.
©Velleman nv