Requirements For The Set-Up Location; Connecting To A Computer - Silvercrest KH 2610 Bedienungsanleitung

Requirements for the set-up location

GB
For safe and faultless operation of the device the set-up location must
fulfi ll the following provisions:
■ The device must be placed on a fi rm, fl at and level surface.
■ Do not place the device in a hot, wet or very damp environment or
in the vicinity of fl ammable materials.
■ Place the device so that it is not subjected to direct sunlight.

Connecting to a computer

System prerequisites
You will need a computer with a vacant USB port and with the
operating system Windows ® XP, Windows ® Vista or Windows ® 7
from the Microsoft ® corporation.
Installation of the drivers and the
ArcSoft PhotoImpression 6 programme
NOTICE
► In these operating instructions only the programme sections
are described that you will need for scanning your slides
and/or fi lm negatives. You can fi nd further information in the
programme's on-line help.
► The illustrations and descriptions refer to the operating system
Microsoft® Windows® Vista. The illustration depictions can
diff er, depending on the display settings, with other operating
systems.
96
Setting up and connecting
KH 2610