Whispbar K505W Fitting Kit Montageanleitung Seite 9

EN
Fitting Kit
K505W
Thread the coach bolt through the clamp
and the leg.
Ensure the two pins of the clamp engages
correctly with the holes in the roof rail.
Tighten the plastic knob.
Ensure the plastic knob is in the position
shown when fully tightened.
Do not over tighten.
Repeat for all four positions.
Ensure the clamp engages correctly on
inside of roof rail.
Use keys to fit and lock covers
Check crossbar is securely attached to the
vehicle.
9