Whispbar K505W Fitting Kit Montageanleitung Seite 8

EN
Fitting Kit
K505W
Apply protective strip as shown.
Trim if required.
It is important to put the clamps in the
correct position on the vehicle.
Letters refer to the part numbers stamped
on clamps.
Clamp Part Number:
A = 685D
B = 731A
C = 732A
Ensure the two pins of the clamp engages
correctly with the holes in the roof rail.
Place one hand on the leg and apply
downward pressure.
Slide clamp through opening in leg.
8