Replacement Parts List; Troubleshooting - Thermopatch NL-33 Auto Maxi Anleitung

10.1 Replacement parts list

Reference
ELECTRICAL PARTS
CAR-CO2
SPA27-005
SPA3X-024
SPA3X-003
PNEUMATIC PARTS
VER-SM29
FIL-013
ELE-SM3
TEFLON and SILICONE RUBBER
SPA3X-100-7
SPA3X-019

10.2 Troubleshooting

Problem
The machine • The plug is not connect-
does not ed
switch on • The switch is not con-
nected
• The emergency stop but-
ton is activated
• The display is faulty
The machine • Faulty heating element
is not heating • Problem with the main
up board
• Temperature is set too
low
The heat- • Problem with the tem-
ing element perature sensor
overheats
The timer • Disabled or faulty cylin-
does not der sensor
count down • Problem with the elec-
tronic board
The press • The control buttons are
head does not working
not lower • Leaking cylinder
• Too low pressure on air
supply
The press • Faulty solenoid control
head does valve
not come up • Leaking cylinder
The press • The timer is not counting
head stays down
down after • No compressed air pro-
pressing vided.
Description
CONTROL BOARD
MICA HEATING ELEMENT 400x500 2500W
TEMPERATURE PROBE
FUSE 5 x 20 mm T 16 A 250 V
CYLINDER Ø100 C50
AIR FILTER
SOLENOID CONTROL VALVE 5/2 G1/8 12V
FOAM 9.53 mm 400 x 500
TEFLON SHEET
Possible cause Solution
• Check your network and if the machine
is connected to it.
• Set the main ON / OFF switch to 1.
• Turn the red knob to unlock the emer-
gency stop button
• Check that the cables are not dam-
aged (possible short circuit)
• Check the connections and the condi-
tion of the wiring
• Remove the heating element
• Check the on-screen messages and
refer to the section error messages,
page 20-21
• Check de messages on the LCD
screen, page 20-21
• Contact your supplier
• Check the connections
• Check the on-screen messages and
refer to the section error messages,
page 20-21
• Check the connections
• Check the seals and all connections,
contact your supplier
• Check the valve couplings, contact
your supplier for replacement
• Check that the air supplied is above 3
bar
• Check the valve couplings, contact
your supplier for replacement
• Check the seals and all connections,
contact your supplier
• See above
Quantity
1
1
1
2
1
1
1
1
1
30